|
| |
Measuring For Your Belt
| Before finishing your belt, Christopher needs you to send
him your belt size, which is different to your trouser size. This measurement
is best taken off of an existing belt and is used to locate the
middle hole of the five which will be punched for the traditional belt, or
the second pair of holes in the sling belt.
|
| If you are able, Christopher would also like a second measurement
from you, that of the middle (or used) hole in your belt to the belt end -
which should be about 2 inches past your trouser loop. This is helpful
because different cuts and sizes of trouser have this loop located
different distances from the fly. |
|
The diagrams below should make this clearer: |
|
 |
|
